Gel Nail Wrap application tips:

  1. Smooth your nails by using the nail file provided and remove any dead skin around the nails.
  2. Clean nails with an alcohol pad, wait for your nails to dry.
  3. Choose the strip that best fits the size of your nail peel off the clear protective film.
  4. Place the strip on your fingernail gently leaving a flight space between the strip and cuticle.
  5. Use the wood stick provided and apply pressure to smooth out the strip onto the nail and edges to secure the strip onto your nail.
  6. Use the nail file provided to file away any excess strip (can also use a nail clipper to cut off excess strip).
  7. Remove any excess strip.
  8. Cure nail strips using Ascent UV LED lamp (1-3 times)
  9. Check to see if your nails have cured. Cured nails will have hardened and will be sealed to the nail in place. 


Gel Nail Wrap curing tips:

  • Turn on the UV lamp as instructed in “UV LED lamp instructions”.
  • Cure nail strips under the lamp (1-3 times).
  • Check to see if your nails have cured. Cured nails will have hardened and will be sealed to the nail in place. 

UV LED lamp instructions:

  • Connect the USB line to the UV LED lamp and the other end of the line to the power supply.
  • Gently press the ON/OFF button once, the default timing of curing is 60 seconds. 

UV LED lamp cautions:

  • Please read instructions carefully before using the lamp.
  • Please keep UV LED lamp away from any liquid to avoid machine malfunction.
  • Please do not use it near fire or in a high temperature place to avoid damaging the UV lamp.
  • Please do not use the lamp when the timer button doesn’t work.
  • Pay more attention to your hands when curing your nail under the lamp.
  • Please do not look directly into the light source of the UV lamp.